-
ZR-1006 Mask Particulate Filtration Efficiency and Air flow Resistance Tester
ZR-1006 mask particulate filtration efficiency and air flow resistance tester is applicable to test the particle filtration efficiency and airflow resistance of masks and filter materials for centers of medical device inspection, security inspection center, drug inspection center, centers of diseases control and prevention, center of textile inspection, hospitals and mask R&D manufacturers.
-
ZR-1070 Dry Microbial Penetration Resistance Tester
The ZR-1070 system consists of gas source generation system, detection main body, protection system and control system.It is composed of a series of components, which are used for the dry state microbial penetration test of operation sheet, operation clothes and clean clothes.
-
ZR-1000 Mask Bacterial Filtration Efficiency (BFE) Tester
Key specifications of Model ZR-1000 mask bacteria filtration efficiency tester (BFE) not only meet the requirements of B.1.1 in YY0469-2011 <technical requirements for medical surgical masks>, but also meet the requirements of ASTMF2100, ASTMF2101 and European EN14683 standards.
-
ZR-1311 Salt Aerosol Generator
ZR-1311 salt aerosol generator is a special instrument that adopts a Collison nozzle to atomize and dry specific concentration of NaCl solution to produce aerosol particles at specific size and concentration. In order to widely adapt to the national climate, it has an external air source design, drying device and multi-nozzle regulating valve. When the air flow rate is between 100L/min-120L/min, the output aerosol concentration can reach to (10 -50 )μg/m3.
-
ZR-1304 Aerosol generator
ZR-1304 oil aerosol generator is a special instrument that could generates oil aerosols with cold generation method. The range of output aerosol concentration is 0~200 mg/m³ when the airflow is 0~120 L/min, and you can adjust the aerosol concentration in a wide range by manually adjusting the dilution flow. The performance of aerosols conform to related national standards and applicable to medical device inspection institutes, centers of disease control and preservation, pharmacy companies, leakage detection of HEPA filters in clean rooms.
-
ZR-1220 Respirator Fit tester
ZR-1220 Respirator Fit tester is a special instrument for fit test of masks and respirators, which conform to OSHA and GB 19083-2010 technical requirements for medical masks. It is widely applicable to the relevant test and inspection of respirator products by respirator manufacturers and national labor protection equipment inspection institutions.
-
ZR-1211 Mask breath resistance tester
ZR-1211 mask resistance tester is used to test inhalation and exhalation resistance of masks in regulated test condition. Compatible to multiple flow rates, is suitable to perform related inspection and test of masks for mask manufacturers, national inspection institutes of labor protection devices
-
ZR-1201 Mask resistance tester
ZR-1201 Mask resistance tester conforms to YY 0469-2011 <surgical mask>. Adopts air flow method to test the differential pressure of masks when the air flow drawn pass a certain area of a mask. Applicable to medical devices inspection institutes, mask manufacturers and related research departments.
-
ZR-1002 mask particle protection effect tester
The ZR-1002 mask particle protection effect tester is to test the particle protection effect of masks by installing the national standard head from in the 500L self-cleaning test cabinet, then wear the mask on the head from, and import the mass median diameter (0.6 ± 0.050) μm, concentration is 20mg / m³ of NaCl aerosol or mass median diameter (0.3 ± 0.050) μm, concentration is 20mg /m³ of oily aerosol into the self-cleaning test chamber, and the head form simulate breathing in sinusoidal curve, using upstream and downstream photometers to detect the concentration of salt aerosol and oil aerosol before and after the mask to evaluate the particle protective effect of the mask.
-
ZR-1000C Mask Bacterial Filtration Efficiency (BFE) tester
Key specifications of Model ZR-1000 mask bacteria filtration efficiency tester (BFE) not only meet the requirements of B.1.1 in YY0469-2011 <technical requirements for medical surgical masks>, but also meet the requirements of ASTMF2100, ASTMF2101 and European EN14683 standards.
-
ZR-1000A Mask Viral Filtration Efficiency (VFE) Detector
The main specifications of the ZR-1000A mask virus filtration efficiency (VFE) tester conform to the YY/T1497-2016 < Evaluation test method for the viral filtration efficiency(VFE) of medical protective face mask materials–Test method using Phi-X174 bacteriophage>, The method of double gas path simultaneous comparison sampling improves the accuracy of sampling.
Qingdao Junray Intelligent Instrument Co.,Ltd.
